• Window and sign must be clean and free of dust and dirt. The use of ammonia based glass cleaner (Windex, etc.) is suggested. Do not use soap and water; a soap film will prevent proper adhesion of the signs.
• Peel letter off white backing sheet.
• Place the self-aligning letters and numbers on the window. Using the plastic applicator, Squeegee the entire surface of the letters to the glass so that the entire letter, especially edges and corners, is pressed flat against the glass surface.
• To set letters in a straight line, set the first letter in a horizontal position. The following letters will then automatically fall in line as they butt up against each other. For variety and interest, vary the signs. Place letters on a diagonal, in an arc, or in other interesting arrangements.
• Lift letters off to remove. Use over and over again as needed.
• When not in use, place letters on the backing sheet and store in Ziplock bag.
• Before using again, be sure that the letters are clean and free of dust and dirt.

• Keep your message simple and avoid excessive copy for easy reading.
• Change sign message and/or position frequently to increase attention.
• Increase visibility by placing words in arcs or diagonals.

Please contact us if you have any questions